Electromagnetic Air Pump

We offer this electromagnetic Air Pump for pushing air, all air pumps contain a part that moves which drives the flow of air. When the air gets moved, an area of low pressure gets created which fills up with more air.

Specifications Of The Electromagnetic Air Pump

• Voltage: 220V 50/60Hz
• Power: 120W
• Pressure : 0.032Mpa
• Output: 0.110 L/Min
• Diameter of outlet : 10mm./ 12 outlet
• Size: 265 by 165 by 175

Features

• Self-cooling design Cool intake air is blown onto the electro-magnetic coils through an orifice, making sealed construction possible and preventing the escape of operating noise.
• Low noise level The machine has no complex transmission system. This results in the lowest noise level possible due to the absence of rotating parts or ball bearings. Operating noise is also quelled due to the pump’s sealed configuration.
• Small output air pulsation Piston reciprocation is synchronized with input power frequency regardless of load (i.e.; 3000 rpm for 50Hz and 3600 rpm for 60Hz). Such high RPM adversely reduces each discharge volume and eliminates any problems caused by pulsation.
• Low Power Consumption The piston is the only component in the system which moves. The absence of transmission usage to pass the power to the piston means that there is a large reduction in energy loss, and an improvement in efficiency over other pumps.
• Compact composite structure This unique system enables direct reciprocation of a single part which consists of composite piston and armature. The incredibly compact and lightweight design was achieved by combining what are two different functions in other pumps – motor and piston – into a single structure.
• Anti-overpressure mechanism When the output pressure exceeds the rated value the piston stroke will automatically diminish and prevent over-pressurizing. At the same time, the current and power consumption will also be automatically reduced, thus eliminating possible failure caused by tentative overload.
• Low vibration The aluminum die-cast piston produces very little vibration or kick-backs. Little or no damage from vibration stress is therefore sustained during the operation. Even secondary vibrations are absorbed by special soft rubber feet.
• Quick Response Due to the lower starting current, the unit can immediately respond to frequent on-off input signals, even under backpressure conditions.
• Longer Durability Oil-free construction requires no periodical oil-up. This simple mechanism has the fewest number of moving parts possible. Long and stable performance is assured.